Usually there is no necessary for you to use handhold computer to set Base in rtk mode, base will transmit signal automatically when the pdop value is less than 3. But if you want to change the collecting interval in static mode, you must connect the handhold computer to base with cable. In rtk mode, you can connect handhold computer to rover by bluetooth or cable. We usually use bluetooth mode . You need to remember: if you want to use cable mode, you must set the communicate port to be com1, if you want to use bluetooth mode, you must set communicate port to be com3 on your handhold computer. In static mode you can change collecting interval by cable connection or bluebooth connection.

This entry was posted on Thursday, April 19th, 2007 at 9:41 pm and is filed under GPS. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.